Pin Fin Tubes

A division of Concept Engineering International, A Heat Transfer Focus Company
Heat Transfer Specialists, Manufacturers of Turbulators, Wire Wound Fin tubes, Brass and Naval Brass plates

Visit us at Stall C74 in the Thermal Processes Hall 6.1 at Achema, Frankfurt.

Concept Engineering International

Established in 1999 Concept engineering is focused on heat transfer enhancement. Led by a US educated CEO it has the following major divisions.

1) Wire wound fin tube and heat exchanger manufacturing division.
2) Turbulator manufacturing division.
3) Brass and Naval Brass tubesheet manufacturing division.

Currently over 90% of our production is directly exported to USA, Mexico, UK, Austria, Germany, UAE, Singapore, Malaysia, Thailand, Indonesia, Australia. We are looking at developing meaningful partnerships all over the world.

  • Our Wire Wound Fin Tubes:-

This web site is focused on the Wire wound fin tubes and heat exchanger manufacturing division. A wire wound fin tube consists of wire loops that are soldered on to the tube and gives an excellent heat transfer property. We also manufacture the conventional crimp and low fin tubes.

Wire wound fin tubes are especially suitable for

a) Steam air Heating applications: This is because the wire fins having a high airside coefficient are able to best utilize the very high coefficient of condensing steam.

b) Water Heaters/ Coolers: Once again the high coefficient is useful.

c) Oil coolers Here to realize their full potential, they must be used together with turbulators produced by our Turbulator division.

d) Compact High strength but light weight Heat exchangers to be used with equipment like Hydraulic oil coolers, Lube Oil Coolers and assorted oil and water coolers.


Steam Air Heaters
Water Heater/Coolers
Oil Coolers

Contact Us

Phone:- +91-022-43533700/99

Our Websites





Second Floor, K.K. Chambers,
Sir P.T. Road,

Download Literature

Stream Air Heater catalog

Fin tube catalog

Air cooled heat exchanger catalog

Turbulators catalog